Can I replace a 25 watt bulb with a 40 watt bulb?

Can you put a 40 watt bulb in a 15 watt lamp?

You can put anything in that socket that uses LESS than 40 Watts – so long as the heat of the unit does not exceed that of a 40 Watt Incandescent- if it says 11W CFL – 11W CFL is the rough equivalent wattage required to get the same level of light output as a 40 Watt incandescent bulb and you can be assured the heat of …

Can you replace a lightbulb with a different wattage?

Yes, you certainly can use bulbs of different wattages in your fixture. The fact that one socket pulls more current is not important. Bulb size is mostly a matter of light distribution and heat management. It’s not relevant here as long as you don’t have them up against something flammable or enclosed too tightly.

Can I put 40 watt bulb?

As long as you don’t go over the manufacturer’s recommended wattage, you’ll be safe. If your fixture doesn’t have a wattage recommendation, the rule of thumb is to choose bulbs with 60-watts or lower.

What is 40 watt LED equivalent to?

Compare wattage

IT IS SURPRISING:  How do you ship fluorescent light bulbs?
Traditional bulb1 Halogen2 LED
40 watts 25 watts 5 watts
60 watts 40 watts 7 watts
75 watts 45 watts 9 watts
100 watts 60 watts 12 watts

Can I use 40w instead of 60w?

If you’re talking about an incandescent light, you can replace it with a 40 Watt bulb, a 15 Watt bulb, or even a 120 Watt bulb. If you change from a 60 Watt incandescent to a 40 Watt one, you’ll notice a few things. Light output will be the first.

Can I use a 28 watt bulb in a 25 watt lamp?

3 Answers. Yes, that’s fine. The ‘maximum wattage’ rating listed on a light fixture is actual watts, not incandescent-equivalent-watts.

Can I use 15W instead of 25W?

d2laz29 said: A 15W bulb is shorter in length (47mm) than a 25W bulb (55mm). The glass protector may not fit over the 25W bulb. If it does it may not leave a small air gap between the glass protector and the bulb, it could also break the bulb when the protector glass cover is tightened.

What does Max 40W mean?

If the lamp says maximum 10 watts, then that means it is not safe for anything with a higher wattage. Not only could the wiring overload, but the parts of the lamp could melt or even catch on fire if using a higher watt bulb. See chart below to understand brightness of light bulbs in lumens.

What happens if you use the wrong wattage light bulb?

Light Fixtures

Because of the heat generated, using a light bulb with a higher wattage than specified may cause the light fixture to overheat. Overheating damages the fixture and may melt the socket holding the light bulb, causing a fire.

IT IS SURPRISING:  Question: Can you reverse polarity on LED lights?

Can I use a light bulb with less Watts?

If you will use a lower wattage bulb in your fixture you will have less light than before, choosing a lower wattage bulb is fine as long you understand that you are compromising on light output (this statement is correct only for incandescent and halogen bulbs).