How do I know if my dimmer switch is LED compatible?
Check Your Existing Dimmer
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
How many LED lights can I put on a dimmer switch?
As an example – if you have a dimmer switch with a maximum rating of 400W (rule of thumb translates to 40W) you can run five 7.1W dimmable LED light bulbs (see example below for further explanation).
Are LED dimmer switches different?
The main difference is that you have a smaller dimming range (typically 70-90% range vs. 100% with incandescent or halogen). LED Bulbs may not shut off at the lowest dim setting like traditional bulbs. … A dimmer for LED lights is specially designed to send power and control signals to each type of electronic LED driver.
Can a dimmer switch cause a fire?
Dimmer switches can get extremely hot and possibly catch fire as well. … If the heat remained within the dimmer switch, it could potentially damage the switch’s wiring, and these damaged internal wires could easily cause a malfunction of the dimmer switch and cause a fire.
Do LED lights require a special dimmer switch?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Why are LED bulbs not dimmable?
Damage or failure – LED driver, circuit or LED is damaged or fails. Load below minimum – The power load of the LED lamp is below the minimum required by the dimmer. Mixed models- Different models of LED will likely have different drivers – since drivers behave differently this could result in dimming issues.
Why do my lights flicker on a dimmer switch?
If bulbs connected to a dimmer are flickering, this is likely the reason why. Loose or poor wiring behind the switch could also cause flickering. Check the ratings for your bulbs and dimmer to be sure they’re compatible. Mismatches here can lead to common fixture problems like buzzing or flickering.
Why does my light dimmer switch get hot?
Older dimmer switches will get warm when dimming the light, whereas modern switches become warm when brightening. Your switch feeling hot to the touch is a result of an uneven balance in your circuit; your bulbs’ wattage is larger than the wattage rating of your dimmer switch.