Is there a difference between a dimmer switch and a LED dimmer switch?
The main difference is that you have a smaller dimming range (typically 70-90% range vs. 100% with incandescent or halogen). LED Bulbs may not shut off at the lowest dim setting like traditional bulbs. … A dimmer for LED lights is specially designed to send power and control signals to each type of electronic LED driver.
Are LED lights compatible with dimmer switches?
Switching out incandescent light bulbs for LED bulbs is a great way to cut down on your monthly energy bills. … Well, the answer depends: Yes, LED lights work on a dimmer when: You have “dimmable” LED light bulbs. You use an LED compatible dimmer.
What happens if you don’t use an LED dimmer switch?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
How do I know if my dimmer switch is LED compatible?
Check Your Existing Dimmer
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
What makes LEDs dimmable?
In the case of PWM, dimmable LEDs work by creating a dimming effect. Unlike traditional lighting such as incandescent, dimmable LED bulbs don’t rely on voltage to dictate their level of brightness. Instead, they essentially rely on a cycle of being on and off.
Are all LEDs dimmable?
In most cases, all models of LED bulbs are available in a dimmable version. But they are not always standard dimmable. Make sure the product name or specifications mention ‘dimmable’. This way you can be sure that the LED bulb is dimmable.
Why are some LED lights not dimmable?
Damage or failure – LED driver, circuit or LED is damaged or fails. Load below minimum – The power load of the LED lamp is below the minimum required by the dimmer. Mixed models- Different models of LED will likely have different drivers – since drivers behave differently this could result in dimming issues.
What happens if you use incandescent dimmer with LED?
When dimming an LED you may notice the following: Smaller amount of dimming rage (Typically 70-90% range vs. 100% with incandescent) LED Bulbs may not shut off at lowest dim setting: this is caused by the dimmer thinking the bulb is completely off due to the low amount of wattage an LED consumes.