Frequent question: Can I hardwire LED Strip Lights?

What power supply do I need for LED strip?

The LED strip has a power consumption of 14W / m. 14 x 8.5 = 119 Watts in total. So you need a LED power supply (sometimes referred to as a LED driver) that can deliver at least 119 Watts.

What happens when an LED is directly connected to a power supply?

When LED is connected to a power supply with a voltage higher than its forward voltage, a current limiting resistor is connected in series with the LED. The current limiting resistor limits the current for the LED and regulates the difference in voltage drops between the LED and the power supply.

Can I power 12V LED strip with USB?

So, in short: no. If your LED strip needs 12V, you need to connect it to a 12V power supply, not a USB port. … As @dandavis suggested in the comments, if you really want to power it from USB, you can get a 5V->12V step-up converter to get 12V from your USB supply.

Can I mount LED power supply in Wall?

The hardwired installation of the Power Supply should only be performed by a qualified electrician. Do not conceal the line voltage input cord or Power Supply inside a wall, ceiling, soffit, or similar permanent structure, unless consulting a licensed electrician.

Is it legal to put LED lights in cars?

Aftermarket LED replacement bulbs are illegal, but there’s little enforcement at the federal level. … WARNING: THIS REPLACEMENT LED HEADLIGHT BULB SET IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road.

IT IS SURPRISING:  Do LED brake lights need a load resistor?