How do I reconnect my ring floodlight camera to WIFI?

How do I get Ring floodlight back online?

Check that all of your wires are properly plugged in and that all the lights on the front of the router are green. Check to see whether another Wi-Fi device is having a problem connecting to the network. Unplug your router for 30 seconds and then plug it back in. See if your Floodlight Cam automatically reconnects.

How do I reconnect my Ring to my WiFi?

If you’re using Android, swipe down from the top of your screen, tap WiFi, then tap the Ring WiFi network. The network will be named something like Ring-123456. Then connect the Ring doorbell to your WiFi. Make sure to connect to the WiFi network closest to where the Ring doorbell will be installed.

How do I reset my Ring floodlight camera?

1 Factory Reset a Spotlight/Floodlight Cam

  1. Make sure the camera is powered up. …
  2. Press and hold the reset button atop the camera for 30 seconds.
  3. After releasing it, the status light located at the bottom will flash a few times indicating the camera is restarting.
  4. The camera is now reset to factory defaults.
IT IS SURPRISING:  Do I need projectors for LED headlights?

Why is my Ring camera not connecting to WiFi?

Remember the troubleshooting for Ring not connecting to wifi includes, reboot, power cycle, network settings change, network range/strength boosting and factory reset of device, that you can try to resolve common Ring wifi camera connectivity issues.

How do I fix my offline Ring camera?

Try removing and then replacing the internal battery. See if your Spotlight Cam automatically reconnects. Press the Setup button on the Ring device to put the device in Setup mode. Wait 10 seconds, then press it again and see if your Ring automatically reconnects.

Why did one of my Ring cameras go offline?

The main reasons why your Ring camera keeps going offline could either be Wi-Fi, internet connectivity, or power issues. For the camera to work consistently, there should be no interruptions to your power and internet connections. Other reasons could be hardware problems like a faulty battery.

How do I reconnect my spotlight camera to ring?

Try removing and then replacing the internal battery. See if your Spotlight Cam automatically reconnects. Press the Setup button on the Ring device to put the device in Setup mode. Wait 10 seconds, then press it again and see if your Ring automatically reconnects.

How do I restart my ring camera?

Ring Spotlight Cam Battery

  1. Find the setup button on the top of the camera.
  2. Press and hold the setup button for 10 seconds.
  3. The light on the front of the camera will flash for several minutes; when the light turns off the reset is complete.
IT IS SURPRISING:  Best answer: Is WD 40 safe on headlights?

Why is my ring floodlight lights not working?

If the light on your Floodlight Cam does not light up and flash and your Floodlight Cam is wired correctly and is receiving power, you can try performing a hard reset. Hold down the top button for a full 30 seconds.