What fuse to use for LED lights?
What fuse to use for LED lights? 75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds.
Do you need a bigger fuse for LED lights?
Extra fuses not always required though
For instance if you are running a 40w LED light strip and have a 50w power supply connected which has a fuse inside of it, you are going to be fine. If anything goes wrong the power supply should protect you and adding an extra fuse probably won’t add too much in that scenario.
Do LED lights have a fuse?
Plug Fuses. Like the incandescent strings before them, the LED strings have a fuse in series with each side of the AC line, located in the plug. Usually there is a trap-door in the plug to open and access the fuses, or there may be a section that pulls out. … Fuses are used to protect the wires.
Do you need a fuse for LED light bar?
Premium Member. You are correct, the light bar will draw 5.4 amps at 13.8 vdc or 6 amps at 12 vdc. According to the switch specs, there is no integral fuse.
What amp fuse do I need for 12v LED lights?
75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.
What amp fuse do I need for lights?
A lighting circuit is protected by a 5- or 6-amp fuse or circuit breaker. This fuse size allows bulbs with a maximum combined wattage of 1150 watts (5 amps x 230 volts) or 1380 watts (6 amps x 230 volts) to be run off the circuit.
Do LED Christmas lights burn out?
Depending on the LED, the bulb may last from 50,000 hours to 200,000 hours as compared to the 3,000 hours of an incandescent light. LEDs are also more durable and do not burn out, thus lasting longer than incadescents.